QuickServer - QuickServer Selection Guide
QuickServer - Cost-effective gateway for Building Automation
There are two primary designs of the QuickServer. The FS-QS-1010 is BTL Marked and includes two serial ports and one Ethernet port. This enables it to 
communicate serial-serial, serial-Ethernet or Ethernet-Ethernet. The FS-QS-1011 includes one serial port, one Ethernet port and one LonWorks port. This enables it to communicate serial-serial, serial-Ethernet, Ethernet-Ethernet, serial-LonWorks or Ethernet-LonWorks.
 |
 |
FS-QS-1010-XXXX |
FS-QS-1011-XXXX |
The part number structure for the QuickServer is FS-QS-101X-XXXX. The XXXX indicates the specific model of QuickServer, indicating the drivers pre-loaded. Using the chart below, click to select the specific model that meets your application needs.
QuickServer Selection Table (Click to select the specific model that meets your needs)
BACnet/IP |
BACnet MS/TP |
Modbus TCP |
Modbus RTU |
JCI Metasys N2 |
LonWorks |
SNMP |
|
|---|---|---|---|---|---|---|---|
| BACnet/IP | |||||||
| BACnet MS/TP | |||||||
| Modbus TCP | |||||||
| Modbus RTU | - |
||||||
| JCI Metasys N2 | |||||||
| LonWorks | |||||||
| SNMP | - |
- LonWorks is a trademark of Echelon Corporation
- Metasys is a trademark of Johnson Controls
- BACnet is a trademark of ASHRAE
The QuickServer Enhanced is also available for those applications that require more than 250 points, RS-232 or RS-422 serial ports or alternative protocols.
- QuickServer BAS
- QuickServer Enhanced
- QuickServer Data Sheet
- QuickServer Start-Up Guide
- QuickServer Technical Support
- LonWorks Protocol
- BACnet Protocol
- Metasys Protocol
- Modbus Protocol
- SNMP Protocol
For more information regarding QuickServer, contact sales@fieldserver.com or call 408-964-4447